Site： Home > News and events 
As most of the screen printing procedures are different; we can discuss about the difference between Flat & Rotary Screen Printing Process:
what's the difference fo Flat Screen & Rotary Screen Printing
As most of the screen printing procedures are different; we can discuss about the difference between Flat & Rotary Screen Printing Process:
1. In Flat Screen Printing Technology the screen is flat and moves up and down. Beside, the Rotary screen is round in size and it rotates.
2. In Flat screen printing the Squeeze is used. In Rotary Screen Printing, just Roller is used.
3. Small width fabric (45-50″) is printed on Flat Screen Printing. On the other side, large width fabric is printed on Rotary screen printing.
4. In flat screen printing pattern, there are only 6 to 8 color is available. But if you use the Rotary Screen printing, then you will be able to use 16 to 24 colors in a pattern.
5. Flat screen printing process gives a lower production rate. And the Rotary Screen printing is comparatively faster than Flat Screen printing and production rate is 3 times higher than that.
6. The initial investment cost for Flat screen printing machine is low, so that it’s less expensive. But, the initial cost of investment in Rotary screen printing is too high; so, it’s expensive.
Though, the Rotary screen printing machine is too much expensive; but in today’s contemporary textile industry uses the expensive one because of it’s productivity and flexibility.
2018-06-07 14:39
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection