T114 Automotive Interior Material Atomization Tester Operation Steps

Qinsun Instruments Co., LTD, established in 2012, focuses on the research and development, design, and production of textile testing instruments. It provides textile testing instruments and services to academic research units and testing institutions. Qinsun is currently one of the most competitive and R&D-capable manufacturers of textile testing instruments in China, with an R&D team composed of experienced engineers. We are dedicated to serving our customers with all our hearts and striving to promote technological innovation in textile testing instruments.

Measuring methods:

Weight method:

DIN 75201-B, ISO 17071, DIN EN 14288-B, ISO 6452-B, SAE J1756, PV 3015, GME 60326-A, GMW 3235-B, TSM05036-B, D45 1727

Gloss method/reflection method:

DIN 75201-A, DIN EN 14288-A, ISO 6452-A, PV 3015, PV 3920, TSM05036-B, D45 1727

Haze method:

DIN 75201-A, HES D6508-95, MS 300-54

Operation steps:

1. First: prepare the accessories and test samples

   
   

2. Place the prepared sample in the fogging cup

   
   

   
   

3. Prepare a piece of aluminum foil, put it in the balance to weigh, and record the value

   
   

4. Place the aluminum foil and glass plate on the top of the fogging cup

   
   

   
   

5. Set the cycle parameters of the low-temperature control box

   
   

6. Set the host temperature and time parameters

   
   

   
   

7. Start the instrument, reach the timing time, take out the aluminum foil from the workstation, put it in the balance again to weigh, and record the value

   
   

8. After the test, measure the fogging value or weight of the glass plate or aluminum foil, and compare it with the data before condensation, so as to obtain the fogging and volatilization characteristics of the sample.

2025-01-06 11:12