What types of materials can be tested using the Taber Linear Abraser?
The Taber Linear Abraser is a versatile testing instrument used to evaluate the wear resistance and durability of various materials. It applies controlled abras......
11-01
How does the ASTM d4846 snap button pull tester work?
The ASTM d4846 snap button pull tester is a test device used to evaluate the strength and durability of clothing buttons. This article describes how the ASTM d4......
11-01
UV Testing FAQs - 15 most frequent questions and answers
Here are 15 of the most frequently asked questions and answers when performing a UV test:1. What is ultraviolet (UV) testing?Ultraviolet (UV) testing is a test ......
10-31
What is the ASTM standard for universal testing machines?
A universal testing machine is a device used to test the mechanical properties of a variety of materials, including tensile, compression, bending and shear. The......
10-31
ISO 2062 Single-end Breaking Force and Elongation at Break of Yarns Testing
ISO 2062 is an international standard for measuring the tracking properties of yarns. The standard contains several test methods, the most commonly used of whic......
10-30
How do you determine the breaking force and elongation of textile fabrics?
Determination of breaking force and elongation of textile fabrics is usually standardised using universal testing machines. The most commonly used test standard......
10-30
Analysis of the recent consumption of the European Union and the United Kingdom textile and apparel
The European Union is one of the important export markets of China's textile industry, China's exports of textiles and clothing to the European Union ac......
10-27
What are the different types of UV aging equipment?
UV ageing equipment is mainly used to simulate the ageing of materials under sunlight (especially the UV portion) in order to predict the durability and stabili......
10-27
What is ASTM D2863 standard?
ASTM D2863 is a standard test method established by the American Society for Testing and Materials (ASTM) that is used to measure the minimum oxygen concentrati......
10-26
What is the standard solution for the salt spray test?
The standard solution used in the salt spray test is usually sodium chloride solution. The preparation method can be referred to ASTM B117, ISO 9227 and other r......
10-26
How to Assess the Moisture Absorption and Quick-drying Properties of Textiles with a Sweating Maniki
IntroductionSweating manikin testing is an efficient and scientifically indicative method designed to evaluate the moisture management and quick-drying properti......
10-25
ISO 6941 Vertical Flame Spread Times Testing Equipment for Textile Fabrics
Product Description IntroductionThis vertical flame spread times testing equipment is suitable for one-component or multi-component (coating, quilt, layered, la......
10-25
What materials or products are typically subjected to an oxygen index test?
The Oxygen Index (OI) test is employed to gauge the flammability of materials. This parameter essentially determines the minimum oxygen concentration required i......
10-24
How to troubleshoot common issues when using the G506 Mask Automatic Filter Performance Tester?
When using the G506 Mask Automatic Filter Performance Tester, you may encounter some common problems. Below are some possible problems and solutions to help you......
10-24
How to Conduct a Tensile Test Using a Universal Tensile Testing Machine?
Conducting a tensile test using a universal tensile testing machine involves several steps to ensure accurate and reliable results. Below is a step-by-step guid......
10-23
How to Operate a Electronic Yarn Clearer: A Step-by-Step Guide
The electronic yarn clearer is a very important piece of textile equipment that is used to automatically detect and remove defects in the yarn during the spinni......
10-23
What is a good air permeability value for fabric?
Good breathability of a fabric is related to its material and construction. Breathability is the ability of air to circulate through a fabric and measures the a......
10-20
EN 71-3: What are the requirements for heavy metal content in toys in the 2019 standard?
EN 71-3:2019 is a part of the European Standard for the Safety of Toys, which focuses on migration limits for specific heavy metal elements in toys or parts of ......
10-20
Which method is commonly used for determination of abrasion value?
The most common method used for determining the abrasion value of a material, particularly in the construction industry, is the Los Angeles (LA) Abrasion Test. ......
10-19
What are the four types of abrasion?
Abrasion is a common process that involves the wearing away or removal of material from a solid surface due to mechanical action. There are several types of abr......
10-19