Site： Home > News and events 
Identifying fibre content of fabric
Do you ever stumble accross the odd fabric in your stash and find you aren't too sure what it is? Or pick up vintage fabric and find you can't indentify it? Below you will find a guide to the burn test, which helps to indentify fabric based upon the way it reacts when burnt.
This guide comes from The Fabric Selector, written by Dana Willard and published by Search Press. It is a great guide to fabric, tools, trims and sewing accessories, every sewist should have this in their book collection.
IDENTIFYING FIBRE CONTENT：
Have you ever inherited a box of old fabrics and not known what they are? The detailed information in this book will help you to identify them, but for further investigation, a burn test will reveal a fabric’s fibre content. To conduct a test, cut a small sample of fabric, hold it with a pair of tweezers and place it over a small flame. Take all necessary precautions and keep a bowl of water nearby to extinguish the flame when the test is complete. Observe the sample for the results listed here to determine the fibre content.
NATURAL FIBRES：
COTTON:
Burns quickly and steadily with a yellow flame. Continues to burn if flame is removed. Smells like burning leaves or paper. Leaves soft, grey ash.
SILK:Burns slowly and will self-extinguish if flame is removed. Smells like burning hair.
Leaves crushable black beads of ash.
WOOL:
Burns slowly and will self-extinguish if flame is removed. Smells like burning hair or feathers. Leaves brittle, black ash.
LINEN:
Burns quickly and steadily with a yellow flame, but takes longer to ignite than cotton.
Continues to burn if flame is removed. Smells like burning paper or rope. Leaves soft, grey ash.
MANUFACTURED FIBRES：
ACETATE: Burns slowly and melts. Continues to burn if flame is removed. Smells like vinegar.
Leaves hard, black beads.
ACRYLIC:
Burns, melts and sputters. Continues to burn if flame is removed. Smells acidic.
Leaves hard, black crust.
NYLON:
Burns slowly and melts. Will self-extinguish if flame is removed. Smells like celery. Leaves hard, grey beads.
POLYESTER:
Burns slowly and melts, with black smoke. Will self-extinguish if flame is removed.
Smells sweet or fruity. Leaves hard black and brown beads.
RAYON:
Burns quickly and steadily with a yellow flame. Continues to burn if flame is removed. Smells like burning wood. Leaves very little, fluffy ash.
2019-08-02 10:00
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection