Site： Home > News and events 
Fire and Flammability Testing
Experior Laboratories offers a range of fire testing services for various types of materials and components. Our staff has the experience to conduct flame testing to military, telecom, and industry standards. Our flame testing capabilities also extends to qualification testing and reliability testing.
Flammability (sometimes called combustion, fire, or flame) testing exposes the product directly to an external flame. In some procedures or standards, a component successfully passes the fire test if the flame is extinguished within a specified amount of time. Component and device manufacturers will want to subject their product to fire testing to ensure the part becomes self-extinguishing; does not violently burn; does not result in an explosive fire; or that the spreading of the surface burning is prevented.
Flame testing typically requires that a laboratory have a test chamber with adequate venting, fan, and viewing window. The source of the fire comes from a propane torch with an appropriate nozzle. Depending on the test procedure or standard, a timing device, cleaning supplies, and measurement devices can be used.
Many military (MIL-STD and SAE), telecommunication (TIA testing), and industrial manufacturers will want to fire test their product. There are many specifications that require fire testing in part of qualification or reliability testing.
TIA-364-45 Fire Wall Flame Test establishes a test method to determine the ability of a mated electrical firewall connector to resist specified flame and vibration during a 20 minute exposure by preventing the flame from breaching the firewall through the connector, and providing specified electrical performance for the first 6 minutes of the 20 minute exposure.
GR-1209-CORE Generic Requirements for Passive Optical Components specifies a “Flammability” tests for plastic material on optical components that shall not sustain combustion when the flame is removed.
ASTM D5207 Small-Scale Burning Tests specifies a method for Plastic Materials and is used to measure and describe the reaction of components exposed to heat or flame.
2019-06-21 11:18
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection