Site： Home > News and events 
Daily maintenance and maintenance:
Cautions Of Zipper reciprocating pulling Test
Zipper Tester is professionally designed for determining the zipper in the tension function of transverse and longitudinal that can sustain the specified number of reciprocating pulling operation. In the test, the machine drives the zipper pull head to perform reciprocating isokinetic movement in a speed of 30 times per minute, up to the specified number.
Test Steps
1. Place the tension machine on the horizontal table and fix the base.
2, installation pointer push tension meter (screw off, with a cross to bag accessories 4 screw off, will the attached bag four phillips screws through the mounting holes on dynamometer installation plate, screwing in dynamometer 4 M3 threaded hole on the back cover, remove the screw thread hole), installed after pushing tension meter table, use the M4 Allen wrench to install the dynamometer plate installed on the frame. According to the sample characteristics of the required test, install or install it on the platform. Rotate the hand wheel on the side of the test frame, and the dynamometer can move smoothly up and down, completing the test work.
3. Install the fixtures required for testing and adjust the position.
4. Adjust the height and position of the bottom fixture continuously, so as to make it fit in the upper stretching fixture.
5. Place the sample on the bottom clamp and fix the button position with the bottom clamp.
6. Adjust the tension meter to make the pointer of the pointer pull down vertically (to zero).
7. Rotate the handwheel slowly until the button on the sample is out of sample.
8. Record the reading of the pointer at this time, return the pointer to zero after completion, repeat the above steps to test several times, and record the measured values.
Daily maintenance and maintenance:
1. Do not overload. The maximum load capacity of this instrument is 500N.
2. Pay attention to daily maintenance and keep the equipment clean.
3. When the instrument is not flexible during operation, please add a small amount of oil lubrication to the refueling hole on both sides of the machine platform. Please contact the manufacturer or the point of sale if the machine fails.
2019-03-15 16:42
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection