Site： Home > News and events 
Hydrostatic Head and Breathability test
What is the hydrostatic head?
The hydrostatic head indicates the waterproofness of a fabric/garment. It is measured in millimeters and indicates the pressure of water required to penetrate the fabric. The fabric is put over the bottom end of a universal tube and then water is poured into the tube until the fabric leaks. For example, a hydrostatic head of 10.000 millimeters indicates that the column of water in the tube was 10 meters (33 ft.) high prior to leaking.
Based on the information above, you might think that a rain jacket with a hydrostatic head of 1.000 mm (1 meter/3.3 feet) will keep you dry throughout a long rainy day but in reality even a jacket with a hydrostatic head of 7.000 millimeters leaks after it has been exposed to rain for several hours. Wind, heavy rain, the weight of your backpack and your movements put pressure on the wet fabric and make it leak faster.
Therefore, waterproof garments are also treated with DWR (Durable Water Repellant) to simply repel the water and thus reduce the amount of water that passes through the fabric under heavy pressure (for example when it gets squeezed). For good waterproofness it is vital to reapply DWR from time to time.
In general, fabrics with a hydrostatic head of up to 10.000 millimeters are suitable for light rain while fabrics with a hydrostatic head higher than 10.000 millimeters are suitable for moderate rain. Only fabric with a hydrostatic head higher than 15.000 millimeters will keep you dry in heavy rain.
However, a higher hydrostatic head value usually also entails a higher price. Check out our reviews of the best hiking rain jackets (high-end rain jackets) and best lightweight waterproof jackets (mid-end rain jackets) to get an idea about the prices. If you want to learn more about rainwear (layers, waterproof technologies etc.) also check out our Comparison of Shell Materials.
What is MVTR?
MVTR stands for moisture vapor transmission rate and tells us how much water vapor can pass through the fabric from the inside out in grams per square meter per day. A waterproof garment should be able to transfer perspiration (water vapor) to the outside as it would otherwise make you soak in your own sweat.
Clothing brands and outdoor gear magazines usually associate MVTR with breathability – which is not completely correct but has become standard practice. Why isn’t it strictly correct? Because breathability simply means how much air can pass through the fabric – and most waterproof fabrics can’t permeate air. Try blowing air into your rain jacket and you’ll see that it doesn’t go through. Instead, waterproof garments can permeate moisture – in the way that when the moisture (from your perspiration) gathers on the inside of the fabric it gets pushed to the outside by body heat. That’s how most waterproof/breathable fabrics work.
There are, however, exceptions; several high-end waterproof/breathable fabrics such as eVent DVstorm, Gore-Tex Pro and Polartec NeoShell actually do breathe (permeate air). Needless to say, rainwear made of these fabrics is also much more expensive than rainwear which doesn’t permeate air (fabrics such as Pertex, Patagonia H2No etc.).
In general rain jackets with a MVTR of 10.000 g/m?/day or less are suitable for skiing and for around the camp activities while jackets with a MVTR of more than 10.000 g/m?/day are suitable for hiking, trekking etc. Only jackets with a MVTR of more than 15.000 g/m?/day perform superbly for highly aerobic activities such as mountaineering, alpine climbing etc.
2018-11-14 14:41
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection