News and events

  • News and events

I'm Online Chat Now

Site： Home > News and events

How to operate Glow Wire tester

Share

Glow Wire  tester is suitable for lighting equipment, low-voltage electrical appliances, electrical instruments, and other electrical and electronic products and non-metallic materials and parts for household electrical appliances, such as: switch shell, relay socket. Wide range of applications. It can be applied to the production enterprises, quality inspection departments, institutions and research institutes and other institutions.


Test Procedures:
1, the operation before the preparation
2, be sure to read the using instructions, and follow the instructions step, followed by operation;
3, do not use non-original accessories, so as to avoid danger;
4, glow wire test machine should be put in the room that have the oil ventilation equipment (or with a special ventilation hood in a small laboratory), in order to expel the exhaust after the test.
5, the two matching weights with copper wire (connected to the sample rack) by the left side of the two pulleys (through the corresponding hole) hanging under the bracket plate.
6, according to the standard requirements of interest and clamping samples.
7, close to the adjustment of the switch
A. The nut that is fixed to the switch is loosened and moved left and right;
B. Press the "left button" car automatically forward, when the sample contact with the hot wire, the hand close the switch, so that the car stopped before the fixed and close the switch.
C. Press the "Heating" button to adjust the current adjustment knob. According to the requirements of the sample, adjust the appropriate current value, while the temperature is required to meet the test requirements of the required temperature.
When the test piece touches the glowing wire head, the limit electromagnet is released and the 1N weight can only be moved forward by 7mm.
When the experiment is finished, eject the heating button and then turn the current adjustment knob to the minimum.
 

2018-08-10 16:02

Related News

Ozone Aging Test Chamber: Understanding Four Concentration Test Methods

How to properly maintain the horizontal and vertical combustion tester?

What you must know about the Xenon lamp aging test chamber filter

Application of Ventilation Aging Test Chamber on Polymer Materials

3 Tips for Purchasing Aging Test Chambers

Matters that must be avoided in the operation of the UV aging test chamber

How to use the UV aging test chamber lamp correctly?

Wire and cable test artifact - ozone aging test box

3 aging factors that must be simulated in the aging test box

The role of Burning Manikin System in the field of thermal protection