Site： Home > News and events 
What is hydrostatic head tester?
Hydrohead Test Method analys
What is hydrostatic head tester?
The definition of hydrostatic head is the pressure of homogeneous fluid act on an object, which can be explained that each part of an object is forced uniformly. The object will shrink its volume when the hydrostatic pressure is enhanced, but the shape will not be changed.
Application:
Hydrostatic Head Tester is used for measures the resistance of a fabric to the penetration of water under hydrostatic pressure. It is applicable to all types of fabrics, including those treated with a water resistant or water repellent finish.
A test sample is placed on the clamping head; parameters of test is set on the Android based software on the Samsung pad; the system automatically start by pressing down the upper clamping arm; the system automatically adjust machine and shift nozzles if required; after a few seconds the test results is then displayed and excel report is generated; the reports can be output to a USB / SD card, or send to any network by WIFI connected.
Hydrostatic head test procedure:
Turn on the power.
Turn on the air pump and adjust the air pressure governor to ensure that air pressure in a reasonable range.
Pouring water into the water tank until it reaches to the highest water level.
Setting and saving the parameter on the setting page according to the standard, and go to the test page.
Place the sample on the clamp to fix it, and then put the pressure transducer into
Attention: The pressure transducer should be zeroed or cleared. Otherwise, the test result might be inaccurate.
Start the test and observe the sample:
the third water droplet has appeared on the surface of the sample, we should stop the test and record the data.
After that, we need to release the sample and change another one for the next test.
Draining the water after all the test is finished, and turn the power off.
2018-06-01 09:58
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection