skills of maintaining Xenon lamp aging tester
ATLAS xenon lamp aging tester is a commonly used production of a class of testing equipment, mainly for the aging test materials, in daily life is of great significance.
Here to introduce you to the use of 12 kinds of xenon lamp aging test box maintenance techniques.
1, the test box for a long time to stop using, re-use must be carefully checked water, power and various components, to determine the correct and then start the UV aging test chamber;
2, if the UV aging test machine in the non-working conditions, should keep its dry, disconnect the power.
The same time as the above-
3, after use, remember to plastic cover, to avoid dust intrusion, if dust, should be promptly removed.
The same time as the above-
4, the studio sensor device do not subject to strong impact;
The same time as the above-
5, UV aging test box failure can not be ruled out, please find the relevant personnel, do not secretly disassembly;
The same time as the above-
6, the prohibition of chemical exposure to the UV aging test chamber; (away from combustibles, explosives);
7, the operator with protective eyepiece and jacket, due to ultraviolet radiation on the staff (especially the eyes) have a strong hazard, so the operator should minimize exposure to ultraviolet light (contact time should be <1min);
8, UV aging test chamber is best placed in a well ventilated place (the proposed installation of ventilation fans, to maintain indoor ventilation), should not be installed in the dusty places;
9, after the end of each test, to remove the sample, UV aging test chamber liner clean;
The same time as the above-
10, after use, remember that the equipment on the cover, if dust, should be promptly removed, keep the appearance of the box clean, to avoid dust into the box.
The same time as the above-
11, UV aging test chamber of the wastewater discharge system must be installed in place
The same time as the above-
12, after the test machine inside the water drained, dry the studio and the box.
2017-06-30 16:00