PortaCount Respirator Fit Tester Scope of application

The Mask Leak testing device is used to simulate the ratio of the concentration of the simulated agent leaked into the mask when the subject inhales to the concentration of the simulated agent in the test environment outside the respirator mask under the specified laboratory test environment. It can also be used for leakage test of protective clothing.

Total leakage rate (total leakage rate) refers to the ratio of the concentration of simulant leaking into the mask from all mask components including filter elements when the subject inhales to the concentration of simulant in the test environment outside the respirator mask.

The leakage rate (leakage rate) refers to the ratio of the concentration of the simulant leaking into the mask from all other parts of the mask except the filter element when the subject inhales, to the concentration of the simulant in the test environment outside the respirator mask.

PortaCount Respirator Fit Tester Scope of application:

medical protection kouzhao,
disposable respirator,
half mask respirator,
full mask respirator,
protective clothing, etc.

Test conditions for leakage of respirator:

1. 10 persons with head and face sizes shall be selected for wearing test according to the adaptation range of each mask, and the subjects shall shave off their beards. The mask should be worn to the extent that the subject feels appropriate, and the headband adjustment should not be too tight or too loose.

2. Detect the concentration of particulate matter in the test bin.

3. The filtering rate of the filter for oil mist is higher than 99.997%. If the manufacturer does not have the filter for oil mist filtering efficiency, it is allowed to replace it with a filter with higher than 99.997% during the test.

Respirator Fit Tester Product features:

1. Simple operation and convenient use

2, independent operation-no external connection to the computer

3. The optional mask sampling adapter allows the tightness detection of various masks

4. The color touch screen can be operated by fingers or pens

5. FitPro+TM tightness test software can automatically complete the test

6. Use an external computer to generate a report and print a test card for tightness

7. The coefficient of tightness is greater than 10,000

8. Use microscopic particles in the ambient air to calculate the mask fit factor

9. Provide interactive training tools for initial and follow-up training

2021-01-26 10:19