Automatic closed flash point tester

Product Introduction:

The instrument can measure the flash point and ignition point of crude oil and petroleum products （flash point below 93 ° C）

Compliant with KS 2010 and ASTM D56, its programmable logic controller and touch screen （5.5 "） help it automate tests and manage test results easily.

Product features:

Because the instrument is automatic, the temperature rise rate is automatically determined after the expected flash point is determined, and the flash point nozzle can find the flash point of the sample during each stage of temperature rise

The instrument is equipped with an air pressure calibration analyzer, and the test results can be automatically calculated and converted into standard atmospheric pressure measurement data.

The unit has a DC 24V durable electric ignition head to provide continuous flame during flame spray testing

The unit is solvent-resistant and has a monitoring touch screen （5.5 "） for easy user management and minimal damage

Calibration: After the temperature and pressure are calibrated at 12 points and 2 points respectively, the correct test standard can be obtained. Calibration is very simple

Test results: While many other testers can only store the most recent test results, the FESTEC AFP761 can automatically save and move nearly 20 test results, and the management of test results is very simple

Single.

Pre-heating/pre-cooling: The temperature of the heating chamber is maintained at the expected sample flash point demand temperature, so standby time during the test will be reduced.