Ventilation Filter Test Stand
Introduction
The Ventilation Filter Test Stand test stand is used to test the initial resistance, final resistance, counting efficiency, gravimetric efficiency, dust holding capacity and other conventional performance for grade G, M, F filters, generate forms and curve, and automatically grade the tested filters.
Standards
EN779:2012 Particulate air filters for general ventilation - determination of the filtration performance.
GB/T 14295-2008 Air filters standard.
Technical Parameters
The Ventilation Filter Test Stand test stand is used to test the initial resistance, final resistance, counting efficiency, gravimetric efficiency, dust holding capacity and other conventional performance for grade G, M, F filters, generate forms and curve, and automatically grade the tested filters.
Standards
EN779:2012 Particulate air filters for general ventilation - determination of the filtration performance.
GB/T 14295-2008 Air filters standard.
Technical Parameters
Item | Parameters |
Flow | 500 - 5000m3/h |
Resistance | 0 - 500Pa,0 - 100Pa ±5Pa;≥100Pa ±5% |
Efficiency range | 20 - 99.9%(≥0.5μm) |
Particle size | 0.4μm(EN779);≥0.5μm(GB/T 14295) |
Aerosol source | DEHS |
Covering area | 14000 x 2500mm |
Power | 6KW |
Note:QINSUN always been committed to innovation and improve product performance and functionality, based on the reasons, the product specifications will be changed accordingly. The above without prior notice, the Company reserves the right to amend the final.